Following the recent hail storm, we’ve been getting asked a lot of questions about our auto body dent repair in Sand Springs.
To reassure you that you’re in the right place, paintless dent repair is a fast and affordable way to put right any minor dents your vehicle might have sustained.
In this post, we’re answering your questions about the dent repair service, and everything it entails.
What is a paintless dent repair service?
Paintless Dent Repair or PDR, as it is also called, is a non-invasive dent removal method that can remove imperfections from the surface of a vehicle without any need to touch the paint job.
The biggest benefits of getting a paintless dent repair service are the speed, the cost, and the effectiveness of the method.
Aside from this, this technique of removing dents will not hurt or damage the factory paint finish in any way, as it does not touch the original paintwork.
What can paintless dent repair fix?
This is an ideal method for repairing shallow dents in a vehicle, and in some cases, it can also work on larger dents, usually up to 3 inches in diameter.
This is typically the case when there aren’t any visible signs of damage to the paint.
Our local paintless dent repair services have been used to help fix:
- Minor collision repair damage
- Fender benders
- Hailstorm damage
- Parking incidents
- Bodylines damage
- Damage from debris on the road
- Dents of up to a few inches
Aside from the above, PDR can also be utilized as a part of the ‘push to paint’ process.
This is where a damaged panel is firstly smoothed out using the paintless dent repair method before it gets repainted. In these situations, it lessens the amount of body filler that is required for the repair.
How long does paintless dent repair take?
As long as your damage qualifies for the paintless dent repair service, then for a single dent, the work can be done in around an hour’s time.
If you want to get a dent repair service for hail damage, then it might take between 1-3 days.
It all depends on the extent of the damage, but your technician will be able to give you a more precise estimate as soon as they see the dent you need to get repaired.
What types of dent cannot be fixed with PDR?
Paintless dent repair isn’t suitable for every type of dent.
For instance, it’s not the best way to any scraped or abrasions that have already damaged the surface of the paintwork.
For paintwork that is peeling, cracked, or bubbling, you would need to get a repaint or touch-up service first in order to protect the metal and prevent any rust from forming.
The overall success of any good dent repair service will depend on the quality of the paint and the extent of the impact.
For instance, any significant pits or indents that may have stretched the metal might need a more invasive car body repair technique.
What does a paintless dent repair involve?
The PDR method is a skill that needs to be mastered over time.
Every type of dent will respond a little differently to different tools.
Some of the different tools used to help pop-out the dents include a rubber hammer, slide hammer, tap downs, fender rods, knockdowns, pivot tips, and brace tools.
As you can see, there are many different options.
The first step in the paintless dent repair process is to push out the dent in order to try and bring back the area of damage to the correct height.
Next, we use specialist reflecting boards and lights to ensure the surface is smooth the whole way across the bodyline.
Without the right tools and experience, a minor dent can be made much worse.
If a dent is pushed too hard, this can cause a high spot and crack the paint layer.
This is why hiring a professional dent repair technician is essential to make sure you protect your investment and ensure the damage is not made any worse than it already is.
How much does a paintless dent repair cost?
PDR is one of the cheapest ways to fix a dent.
However, the price can vary a lot, depending on the severity and spread of the dents.
For smaller dents, it could cost anything between $80-$140.
For more extensive damage, such as dents caused by a collision, the cost could be a little higher and could be anything between $150-$400.
Hail damage dent repairs can vary greatly: this depends on a few key factors.
- The size of the dent – We usually measure the size of a dent using coin sizes as reference. Once we know whether it is similar to the size of a dime, nickel, quarter, etc. we can give you a more accurate estimate for the work. We’ll also need to know the depth, as this can help us determine the cost as well.
- The extent of the damage – the number of panels that need a dent repair service, along with the number of dents on the panel will impact the cost.
- The area of the vehicle that has sustained the damage – When a dent is located closer to the edge of a panel, it can take a little more time to fix. The specific panel and the location of the dent on that panel will also impact the cost of getting a dent repaired.
Will insurance coverage pay for a paintless dent repair?
If you have comprehensive coverage or the at-fault party in a collision has comprehensive coverage in place, then paintless dent repairs are usually covered. However, it’s always best to check with your insurance provider to get a definitive answer.
LOCAL DENT REPAIR SERVICES NEAR YOU
Battman Collision Repair is a locally owned and operated auto body shop in Sand Springs, OK.
Our talented team of auto body experts takes care of a huge range of vehicles that require minor repair works through to comprehensive collision repairs.
We focus on delivering high-quality repair services at affordable prices through a team of friendly professionals.
If your vehicle has sustained damage and you need a dent repair service, we can provide you with a quick quote and outstanding results.
Contact us today, or simply fill out the form below to learn how we can save you money.